Conductive Rubber Sheets - Pressure Sensitive Sheets - Pressure Mats - Conductive Pastes
|
These materials are highly conductive with volume resistivity less than 0.1 ohm.cm. They have many applications such as flexible electrical contacts, RFI/EMI shielding mateiral, as well as in antistatic applications. Available in 2 sizes, 3 thicknesses; See below.
CD45.1 - Shore A hardness 45 |
CD75 - Shore A hardness 75 |
6" x 6" | .02" thick - .04" thick - .06" thick |
6" x 6" | .04" thick - .06" thick |
12" x 12" | .02" thick - .04" thick - .06" thick |
12" x 12" | .04" thick - .06" thick |
CD45.1 - (download data sheet pdf) |
CD75 - (download data sheet pdf) |
|
|
|
|
|
These materials are at a high resistance state without pressure or the applied pressure is below the actuation pressure, but are at a very low resistance state when the applied pressure is equal to or higher than the actuation pressure. They have many applications such as in conductive rubber keypads and mechanical pressure switches. Available in 2 sizes, 3 thicknesses; See below.
ZL45.1 - Shore A hardness 45 |
ZL60.1 - Shore A hardness 60 |
6" x 6" | .02" thick - .04" thick - .06" thick |
6" x 6" | .02" thick - .04" thick - .06" thick |
12" x 12" | .02" thick - .04" thick - .06" thick |
12" x 12" | .02" thick - .04" thick - .06" thick |
ZL45.1 - (download data sheet pdf) |
ZL60.1 - (download data sheet pdf) |
|
|
|
|
|
|
These pressure mats are primarily designed to detect the presence of people in a localized zone.
Pressure from standing on or walking across mats closes the circuit. They can provide more focused detection
than motion sensors in security and surveillance systems, which may reduce false alarms. They can also be used
as a switch/sensor in many interactive devices, such as toys and doors etc. Available in 2 sizes.
|
These highly conductive pastes are two-part systems that are curable at room temperature. They have many applications such as in-place RF gaskets, conductive adhesives, and flexible conductive parts etc.
Available in 1/4 lb kit or 1/2 lb kit. |
FL45
The cured material has a Shore A hardness of 45 |
FL75E
The cured material has a Shore A
hardness of 75 |
The paste is packaged in 50ml double barrel syringes. |
The mixing ratio for FL45 is 6.63A to 1B. |
The mixing ratio for FL75E is 1A to 1B. |
FL45 - (download data sheet pdf)
Material Safety Data Sheet FL45 -
(download MSDS) |
FL75E - (download data sheet pdf)
Material Safety Data Sheet FL75E -
(download MSDS) |
|
$59.95
|
|